As a part of the icing research conducted at Novia UAS, one aim is to help forest and bioenergy companies with finding new solutions and ways of decreasing the freezing and adhesion of wood chips to storage container walls during cold weathers. In order to do so, close cooperation with the thermal spray and icing laboratories at project partner Tampere University has begun, where experimentation setup and work with different anti-icing and icephobic coatings and surfaces has started.
During a week in August, project personnel from Novia and Tampere University met at the thermal spray laboratory at TAU in order to prepare for and start up the collaborative experimentation work. As the goal of the experimentation is to investigate wood chip freezing behavior on differently coated surfaces, the first part of the preparations consisted of treating and coating the surfaces of test boxes and sample plates. These will later be filled with wood chips and placed in a cold room, after which different centrifugation, cycling and adhesion tests will be performed.
The coatings were done by flame spraying LD-PE powder onto the sides of the metal test boxes with the help of a robot (ABB IRB 4400/60), gun (CastoDyn DS 8000) and the powder feeder (Sulzer Metco 4MP). By carefully programming and adjusting pretreatment conditions as well as parameters such as temperatures, pressures, powder feeding rates and layers, a dense polyethylene coating could be created.
For the box tests, three metal boxes will be used: one box coated with the flame spayed polyethylene (FS-PE), one flame sprayed with SLIPS and one untreated box for reference. Furthermore, a box made of PE- Quicksilver will used. In addition to the boxes, small sample plates for the centrifugation adhesion tests (CAT) were also prepared with the flame sprayed polyethylene coating (FS-PE), whereas more CAT samples will be made with other surface coatings, ie. FS-SLIPS, hydrophobic coatings, and oils such as silicon and rapeseed and tested out with the frozen wood chips in the icing laboratory.